8 Best Circular Saws With Reviews – 2016 | Research Core

Introduction To The Best Rated Circular Saws For Home & General Use

Circular SawA circular saw is a powerful tool to have in your arsenal.  A circular saw is an electric, handheld tool that houses a round flat blade that rotates rapidly to cut through wood, steel, masonry, plastic, and other substances, depending on the blade and the power of the saw.  Another type of circular saw is the table saw, but today we are limiting our discussion to the handy handheld type of circular saw. 

Circular saws are usually powered by electricity and thus require a cord and an outlet.  However, some may be powered by a gas engine or a hydraulic motor when attached to heavy equipment.  Other circular saws are cordless, powered by a battery, but those saws have limitations and are not as useful as a circular saw that plugs into an outlet.

What Is The Best Circular Saw? 

Each circular saw blade is specifically designed for the material or materials on which it is to be used and for the type of cut it will make, such as a rip-cut, cross-cut, or a combination of the two.  Thus, the type of work one is doing should be considered in selecting both a saw and a blade.

Weight and size of the circular saw is another key element to determine.   As with any tool, user fatigue can set in if forced to hold a heavy tool for long periods of time on a job.  In addition, length of cord can be a limitation, depending on your work environment.  A longer cord may be more cumbersome, but it allows your tool to cover more distance on the work site. 

Circular saws can be compared on a number of important factors such as depth of cut, which can determine how thick of a material the saw can cut, and bevel capacity, which can determine the angled cuts the saw can manage.  Power and speed for corded circular saws are measured in max watts out and in revolutions per minute (RPM).   These measurements determine how fast and how powerful the circular saw’s performance will be.   

Let’s Take a Look at Some of The Best Circular Saws Models With Reviews Available on The Market Today…

Image:
Image:
Product:
Average User
Satisfaction:

# 2

Makita 5007MGA Magnesium 7-1/4-Inch
Circular Saw with Electric Brake
4.6 Stars (4.6 / 5)


# 2
DEWALT DWE575SB 7-1/4-Inch Lightweight
Circular Saw with Electric Brake
4.7 Stars (4.7 / 5)


# 3
SKIL 5780-01 120-Volt
7-1/4-Inch 2 Beam Laser SKILSAW Circular Saw
4.7 Stars (4.7 / 5)


# 4
Milwaukee 6390-21 7-1/4-Inch 15-Amp
Tilt-Lok Circular Saw
4.4 Stars (4.4 / 5)


# 5
RIDGID TOOL COMPANY
R3205 7-1/4" 15 Amp Circular Saw
5.0 Stars (5.0 / 5)


# 6
Bosch CS5 120-Volt
7-1/4-Inch Circular Saw
4.0 Stars (4.0 / 5)


# 7
PORTER-CABLE PC15TCS
7-1/4-Inch 15-Amp Heavy-Duty Circular Saw
4.4 Stars (4.4 / 5)


# 8
Hitachi C7BMR 15 Amp 7-1/4-Inch
Circular Saw with Magnesium Housing and Brake
3.7 Stars (3.7 / 5)



Makita Magnesium 5007MGA

Makita Magnesium Circular Saw

Makita Magnesium 5007Mga Circular Saw

The Makita Magnesium 5007MGA is a powerhouse of a circular saw with a 15 AMP motor delivering 5,800 RPM and 2,300 max watts out.  This power and speed allows the Makita to cut through even the densest woods.  With a 90-degree depth cutting capacity of 2 ½ inches, this 10.6 pound saw provides a lot of power and cutting depth in an average size and weight package. 

This saw also includes special features such as LED lighting to keep cuts on track and a dust blower to keep the line of the cut clear from debris.  The Makita Magnesium 5007MGA also offers an impressive bevel capacity of 56 degrees, allowing the user to make a wide range of angled cuts.  This saw also features bevel stops at 22.5 and 45 degrees for quick, accurate adjustments to those angles, and a respectable cord length of 8.5 feet.


 

DeWALT DWE575SB

best dewalt circular saw

DeWalt Circular Saw DWE575

The DeWalt DWE575SB is a lightweight circular saw, weighing in at only 8.8 pounds.  This particular feature has its benefit in that the user can carry and hold the saw longer without getting tired.  However, that lighter weight comes at a cost of less power and speed.  The DeWalt only has 5,100 RPM as its maximum speed and max watts out at only 1,950.  It does offer impressive maximum depth cutting capacity of 2.55 inches and bevel capacity of 57 degrees, one the highest on the market.  A positive stop is noted at 22.5 degrees and 45 degrees in this model, which allows for quick and accurate adjustments for cuts at these two angles. 

In addition, a 9-foot cord and a dust blower feature increase the versatility of this tool.  The DeWalt also boasts of an electric brake, a safety element that stops the blade from turning once the cut is made.


 

SKIL 5780-01

 

Skil circular saw

SKIL 5780-01

The SKIL 5780-01 has some unique features not often seen in other saws, but also has some significant limitations.  Let’s start with the unique features.  This saw has a 2 beam laser feature to help guarantee an accurate cut along with an anti-snag lower guard for safety and accuracy. Another safety figure is the guarded trigger which prevents accidental starts.

However, there are a few limitations such as the relatively short 6-foot cord that would limit the user’s mobility and reach.  This issue could cause a problem depending on the job or site.  At 5,300 RPM, the speed of this saw is a bit lower than other models. 

The bevel cut capacity is slightly lower 51 degrees, and it only features one positive stop at 45 degrees, whereas most models offer one at 22.5 degrees as well.  The depth of cut at 2 7/16 inches is respectable as is the weight at 10.1 pounds.


 

Milwaukee 6390-21

Milwaukee Metal Cutting Circular Saw

Milwaukee 6390-21 Circular Saw

The Milwaukee 6390-21 boasts an amazing 5-year warranty which is very impressive and should set the buyer’s mind at ease.  The 3.25 HP motor provides a powerful 5,800 RPM, one of the higher in the market today.  Another positive element for the Milwaukee saw is their patented handle design that allows quick and easy adjustment, giving the user a variety of grip options and the ability to use the tool in a way that is the most comfortable for the individual user. 

One drawback is the limited bevel capacity of 50 degrees, one of the lowest on the market today, which limits the angle cut abilities of this saw.  In addition, this saw lacks bevel stops completely, meaning you cannot quickly adjust to common angles such as 45 degrees.  It also lacks extra features such as an electric brake to stop the blade or laser guides for accuracy

The 2 7/16 inch cutting depth is impressive and the weight of 10.4 is average in this category.  The cord length of 9 feet is a nice feature, allowing increased mobility on the site. 


 

RIDGID R3205

Ridgid Smaller Circular Saw

RIDGID R3205 Circular Saw 

With those 11 pounds comes a strong 5,800 RPM speed.  It also provides a massive 10-foot long cord that is among one of the best lengths of any circular saw cord.  This length provides a lot of flexibility for use and maneuverability.

One design feature of the RIGID R3205 is the well-designed, effective dust chute that receives rave reviews for keeping the area clear of sawdust.  However, some reviewers have complained about the difficult process of blade removal in this design. 

This saw features a 56-degree max bevel capacity with a stop at 45 degrees only (lacking the 22.5 degree stop other models offer).  The maximum cutting depth is 2 3/8 inches which is more than adequate, but still slightly less than average in the field of saws. 


 

Bosch CS5

Bosch Circular Saw

Bosch CS5 Circular Saw 

The Bosch CS5 offers an awesome 6,200 RPM speed while maintaining a low weight of only 10 pounds which means a lot of speed and power from a relatively easy to handle package.  The tool has a very nice bevel capacity of 56 degrees, but has no stops at 22.5 or 45 degrees which is quite a feature of omit from a design as it saves the user time. 

One unique feature of this saw is that the blade is housed on the left side which means the user has a clear, unobstructed view of the cut while using the saw.  The dust chute, while effective in removing dust from the work area, does channel the dust toward the saw operator which can be an annoyance. 

At 9 feet, the cord length is excellent, providing the user with a large work area.  The maximum cutting depth of 2 7/16 is a positive feature along with an anti-snag guard and easy system for changing blades. 


 

Porter-Cable PC15TCS

Porter Cable Circular Saw

Porter-Cable Pc15TCS Circular Saw

While the Porter-Cable PC15TCS offers a lot of power and speed with 5,600 RPM, that power and speed comes with the drawback of it being one of the heaviest saws at 11.3 pounds.  In addition, its bevel capacity is only 45 degrees, meaning no angle above 45 degrees can be cut, another limitation.

Reviewers mark that the dust chute on this saw is fantastic and that it makes extremely smooth cuts in addition to having a well-designed safety guard covering the blade.  However, it lacks features such as a laser or positive bevel stops and the cord length of 7 feet is rather limiting.  The maximum cutting capacity of 2 3/8, while not the largest in this category, is still sufficient.


 

Hitachi C7BMR

Hitachi Circular Saw

Hitachi C7BMR Circular Saw

The Hitachi C7BMR has a speed of 5,800 RPM which is powerful, especially considering it only weighs 10.3 pounds.  The 5-year warranty is also a positive aspect offered by few other models.  The cord length of 8 feet is decent, as is the maximum cutting depth of 2 3/8 inches.  The bevel capacity of 55 degrees is a great feature, but the saw surprisingly lacks a positive stop at 45 degrees to assist in quick adjustments to that common angle. 

One complaint frequently made about the Hitachi is the dust buildup in front of the saw while in use, which decreased visibility of the cut.  This limitation was not a problem on lighter materials, but in heavier woods, it presented as a problem.

The electric brake that stops the blade when the cut ends is a welcome safety feature.  This saw’s sheet power in a lighter 10.3-pound frame along with a 5-year warranty makes it a tool to consider despite its limitations.    


EXTRAS: Before making any cuts make sure you know how to use a tape measure!

Check Out This Video On How To Use a Circular Saw.